Menu
Your Cart

CTEK - XS0.8 12V 12 VOLT 0.8A 800MA 6 STAGE BATTERY CHARGER

CTEK - XS0.8 12V 12 VOLT 0.8A 800MA 6 STAGE BATTERY CHARGER
CTEK - XS0.8 12V 12 VOLT 0.8A 800MA 6 STAGE BATTERY CHARGER
CTEK - XS0.8 12V 12 VOLT 0.8A 800MA 6 STAGE BATTERY CHARGER
CTEK - XS0.8 12V 12 VOLT 0.8A 800MA 6 STAGE BATTERY CHARGER
CTEK - XS0.8 12V 12 VOLT 0.8A 800MA 6 STAGE BATTERY CHARGER
CTEK - XS0.8 12V 12 VOLT 0.8A 800MA 6 STAGE BATTERY CHARGER
CTEK - XS0.8 12V 12 VOLT 0.8A 800MA 6 STAGE BATTERY CHARGER
CTEK - XS0.8 12V 12 VOLT 0.8A 800MA 6 STAGE BATTERY CHARGER
CTEK - XS0.8 12V 12 VOLT 0.8A 800MA 6 STAGE BATTERY CHARGER
CTEK - XS0.8 12V 12 VOLT 0.8A 800MA 6 STAGE BATTERY CHARGER
CTEK - XS0.8 12V 12 VOLT 0.8A 800MA 6 STAGE BATTERY CHARGER
  • Stock: In Stock
  • Model: MAINTENANCE TRICKLE CHARGER
  • Ask Question
$99.95

 

The XS 0.8 is CTEK's smallest 12V charger.  It offers state of the art technology and is perfect for charging smaller 12V batteries that can be found in motorcycles, jet skis, ATVs and lawnmowers.  An easy-to-use, fully automatic 6-stage charger that supplies 0.8 A, which is ideal for maintenance charging all lead-acid batteries from 1.2–100 Ah and charging batteries 1.2–32Ah. 

It is also suitable for maintenance charging "normal- sized" batteries such as car batteries.  The unique display allows the user to follow the entire charging process.  The XS 0.8 is a compact and fully automatic 6-step charger for 12V batteries from 1.2-32Ah and is suitable for maintenance charging up to 100Ah.  The XS 0.8 is IP 65 classified (splash and dust proof), delivers 0.8A and is designed to protect vehicle electronics.  It is non-sparking, reverse polarity protected and short-circuit proof. 

WHATS INCLUDED 

Included in the pack are 2 sets of battery leads, 1 set with eyelet terminals and the other with clamps, the eyelet terminal set is ideal for that hard to reach battery where you would normally fix the clamps on to (i.e. under the seat of your motorcycle), with the eyelets all you do is fit them to the battery and run the lead with plug end on it to an easy to access location and just plug the charger into there when required. 

SPECIFICATIONS

 

Input voltage:

220-240VAC, 50-60Hz

 

Output voltage

14.4V

 

Charging current

0.8A

 

Ripple

10mV rms, 12mA (2%)

 

Ambient Temperature

-20°C to +50°C, output power is reduced

 

Cooling

automatically at higher temperatures

 

Charger Type

Six stage, fully automatic switch mode with pulse maintenance

 

Batteries

12V lead-acid batteries (Wet, MF, AGM, Calcium/Calcium and GEL)

 

Battery size

1.2-32Ah (1.2-100Ah maintenance charging)

 

Dimensions

(L x W x H) 142x51x36mm

 

Insulation

IP65

 

Weight:

.3kg

 

 

Write a review

Please login to review