SHOEI CHEEK PADS 31MM (NEOTEC - NEOTEC 1) TYPE-C < PAIR OF 2 / LEFT AND RIGHT > STD 2XL - XXL SIZED HELMET

SHOEI® CHEEK PADS ~ PAIR

The NEOTEC transforms motorcycling into a luxurious way of getting around on two wheels.
With an individually tailored inner padding, you can increase the feel-good effect even further.

With our genuine Shoei cheek pads you can replace the original padding on your helmet. Or you can use a slightly thicker or thinner pad for individual adjustment. The size information indicates the thickness of the padding in millimeters. For example, "39" stands for a thicker pad, "31" for a thinner pad, as shown in the diagram below.  Cheek pads of a helmet model are interchangeable in all available sizes.

You can find the size information of the original cushion on its back.

The ergonomic, three-dimensional pre-forming of the cheek padding ensures that it rests over a large area on the cheek, ensuring that the helmet sits securely even at high speeds. A pad that sits tightly but comfortably on the cheek and chin also reduces the ingress of drafts and contributes significantly to sound insulation.

If the inner padding of the helmet is worn out after many kilometers together or can no longer be cleaned, replacing it will ensure a renewed fit and a fresh, hygienic helmet interior.

Set of 2 cushions (left/right).

Suitable for the original Shoei NEOTEC model.

Fastening via snap fasteners and fastening strip.

Instructions for assembly and cleaning can be found in the NEOTEC manual.

These genuine Shoei cheek pads suit the below Shoei helmet:

ü  Neotec / Neotec 1